Netbus- The Ultimate Trojan

 

NetBus or Netbus is a software program for remotely controlling a Microsoft Windows computer system over a network. It was created in 1998 and has been very controversial for its potential of being used as a backdoor .

 

It’s author claimed that it was designed as a prank, but as you can see, it’s very easy to use and just as dangerous…

 

How to Use Netbus to Hack Remote Computer

 


 

NetBus is a Software which is used to Control any computer in the internet. All you need is to install the patch on the remote system and find the ip address of the remote computer. You can do that by a file transfer and you can find the ip address when the file transfer is going on. For Example if your sending the file via Yahoo Messenger , Open the Command Prompt by typing “cmd” in run dialog box.

 

Type this line
netstat -n


 

This will show a list of ip addresses which are connected. You Should Find out the ip address of the victim from that list. After you get the ip address and also the patch is installed. Open the Netbus and enter the ip address of the victim and click connect. After your connected you can control the victim’s pc
You can do the following with victim’s computer after your Connected 

Open/Close CD-ROM
Show optional BMP/JPG image.
Swap mouse buttons.
Start optional application.
Play a wav file.
Control mouse.
Show different kind’s of messages.
Shut down Windows.
Download/Upload/Delete files
Go to an optional URL.
Send keystrokes and disable keys.
Listen for and send keystrokes.
Take a screendump.
Increase and decrease the sound-volume.
Record sounds from the microphone.
Upload optional file.
Make click sounds every time a key is pressed. And more

Download Netbus

DISCLAIMER: ASHTRICKS HAS CREATED THIS POST FOR PURELY EDUCATIONAL PURPOSES, ASHTRICK ACCEPTS NO LIABILITY FOR TH USE OR ABUSE OF THE METHODS GIVEN HERE.

Comments (2)

  1. Carl January 31, 2012
  2. Aamir January 20, 2015

Leave a Reply